Click image to view full size image
WSH01 ectro hydraulic valve solenoid valve , high pressure , Hydraulic Directional Valves
General Data
| Mounting position | anywhere | |
| Operating temperature | -30~+50(nitrile rubber seal) | |
| -20~+50(rubber seal) | ||
| weight | Single solenoid valve kg | 1.45 |
| Double solenoid valve kg | 1.95 | |
Hydraulic Data
| Maximum operating voltage fluid port P,A,B Mpa | 31.5 |
| Hydraulic fluid port Mpa | 21(DC):16(AC) When working pressure exceeds the allowable pressure, valves with the sign bit A,B must use T as oil drain port |
| Maximum flow rate 1/min | 80(DC); 60(AC) | ||
| Flux areas (when in the median) | Type Q | mm2 | about 6% of the nominal cross-sectional area |
| Type W | mm2 | about 6% of the nominal cross-sectional area | |
| Hydraulic oil 1,suitable for nitrile rubber and fluoro rubber seal 2,Fluoro seal only | Mineral oil(HL,HLP) by DIN51 524 Rapid biological solution oil by VDMA24 568 HETG 1); HEPG 2);HEES 3) | ||
| The oil temperature range | -30~+80(nitrile rubber seal) | ||
| -20~+80(rubber seal) | |||
| Viscosity range mm2/s
| 2.8-500 | ||
| Oil cleanliness | The highest oil pollution level by NASI1639 Class 9 recommend minimum filter filtration precision β10 higher than 75 | ||
Electrical Data
